Swimming Pool Excavation Tips for Newbies

Before building a swimming pool, you will need to excavate the ground to make room for the pool. If you don’t excavate the ground properly, your pool could see numerous problems later on down the line. When it comes down to it, excavating requires numerous steps. Moreover, you have a number of considerations to make sure you have the right location for your pool. For instance, you don’t want to accidentally dig into a utility line – this will set back your pool building process for multiple months. If you are trying to have your pool ready by next summer, you won’t want any setbacks. Here are some swimming pool excavation tips for newbies.

  1. Hire a professional excavator. Before you do anything, you want to hire a professional excavator, like Stark Excavating, to help consult and excavate the land for your swimming pool. The last thing you want is to dig the earth yourself. There is a good chance that you will be hitting heavy rocks and thick soil – it could take you multiple months to make any headway.
  2. Find the ideal place for your pool before you dig. It is also critical to find the ideal location for your pool before you dig. If you have a large outdoor space, you may have a lot of options. However, the best place for your swimming pool is often close to your home. You will want to be able to run between your home and the pool. If you have a guesthouse, this is a different story, because you could easily turn that guesthouse into a pool house.
  3. Survey the land before you excavate. On top of everything, you also want to properly survey the land. Surveying is important, because it will allow you the opportunity to measure inclines and other anomalies in the area where you will be digging. All of these things will need to be taken into account when you are designing and building your pool. If you build on a steep incline, it could cause serious problems in the future. If your backyard is not flat, you may need to add some ground to make it flat.
  4. Make sure that there are no utility lines. Also, you want to take into account that there may be utility lines under the soil. One of the most common lines is a sewage line. The last thing you want is to dig and hit a sewage line – it will be messy and not very fun to clean up. Not to mention, it will also be very expensive to fix. Moreover, you don’t want to hit electrical or gas lines either.
  5. Test for groundwater. There may also be the possibility of groundwater in the area where you are digging. It may be more than 10 feet deep, but it could cause the digging process to become delayed if water starts seeping through. One of the best ways to avoid groundwater is to find out where it is and then build your pool around it. In the end, groundwater can be the enemy of your next pool project.

Related posts:

  1. 5 DIY Swimming Pool Cleaning and Maintenance Tips
  2. 5 Winter Swimming Pool Maintenance Tips
  3. 5 Swimming Pool Leak Detection Tips for Homeowners
  4. 5 Benefits of Adding an Inground Pool and Spa to Your Home
  5. 5 Things to Know Before Doing Paver Patio Project
Both comments and pings are currently closed.

Comments are closed.