5 Tips for Replacing Your Old Water Heater

Replacing your old water heater is a big move as a homeowner, but it is also a common part of home maintenance and renovation. Overtime, water heaters become old, inefficient and they may not work as well as they did in their prime. Overtime, a water heater can become a critical part of your home – every warm shower you take, you can thank your water heater. But what do you do when your water heater clunks out on you? The easiest solution is to replace the entire water heater. However, there are some important things to keep in mind when you do replace your water heater. Here are five tips for replacing your old water heater.

  1. Make sure that the gas and water is turned off in your home. Our water heaters are attached to two of the most important things in our home: water and gas. So, to avoid a water and gas leak, make sure to turn off those two utilities. You also want to turn on all the hot water faucets in the home to drain out the hot water. When you drag your old hot water heater out, you can use a hose to make sure it is completely empty.
  2. Make sure to cut the pipes. When you remove your old hot water heater, you also have to replace the plumbing behind the heater. Most hot water heaters are hard plumbed into the wall, so you have to saw off the pipes. In most cases, you need someone to help you out with this job, because it can be quite labor intensive. You also want someone to be there when the hot water heater comes loose. The last thing you want is to get injured.
  3. Make sure to find a reputable hot water heater supply retailer. For instance, National Tank Outlet has some quality, state-of-the-art water heaters for sale. What you don’t want is to purchase a hot water heater from a less than reputable hot water heater supplier. You also don’t want to wind up with a used, but reconstructed, hot water heater. Refurbished hot water heaters have a much shorter lifespan than a brand new hot water heater. Plus, buying a new hot water heater is a much better investment.
  4. Make sure to keep all your faucets open when you install your new hot water heater. Even after all the water is drained, you want to make sure they are all on and have an open channel. This is important, because you don’t want air to become trapped in the pipes. If air becomes trapped, it could cause significant damage, like bursting pipes. So, make that your faucets are all turned on during the entire installation process.
  5. Make sure to test the hot water heater once it is installed. Making sure that your new water heater is in working condition is important. For instance, you want to make sure that the hot water gets hot and the cold water gets cold. You also want to make sure the hot water doesn’t get scalding hot. If anything of these things happen, you may need to make tweaks in the piping before you power up again.

Related posts:

  1. 5 Water Heater Energy Savings Tips
  2. How to Thaw Frozen Hot Water Pipes
  3. Top 5 Home Heating System Safety Tips
  4. How to Detect Water Damage in An Old Home
  5. 8 Things to Consider Before Replacing Your Old Roof
Both comments and pings are currently closed.

Comments are closed.