DIY Roof Inspection Tips to Find Leaks

When it comes to caring for your roof, which acts as your home’s best defense against the elements, it’s probably a good idea to perform an inspection at least annually. For this task you can shell out the dough to have a professional take a look, but unless you happen to be infirm or afraid of heights, there’s no real reason you can’t conduct this type of inspection on your own. In fact, it’s a pretty simple process when you know where to look and what to look for. And in the event of damage or leaks, early detection and repairs could save you a ton of money, so it’s well worth the time and effort. However, there are a few steps you’ll need to follow if you want to do the job right. Here are some basic guidelines to get you started.

You want to practice safety first, so it’s a good idea to make sure you have the gear and the help you need to conduct a thorough inspection without risking your health and safety. This will probably require you to wear goggles and a mask when you’re up in your attic – if it is unfinished there will either be exposed loose fill or batt insulation, and if it contains fiberglass you don’t want to inhale it or get it in your eyes. You also don’t want it on your skin since it can cause itching and irritation, so long pants and a long-sleeved shirt are probably a good idea, as well. As for the outside, make sure you have a spotter to hold your ladder when you are climbing up or down, and wear rubber-soled shoes that will grip the roof. In addition, perform your inspection only when the roof is dry. These safety precautions will minimize your chances of coming to harm.

Now, you need to know what to look for if you want to spot problems that could lead to leaks, or leaks that have already started. On this inside this means using a flashlight to inspect the entire underside of your roof, paying particular attention to common points of water ingress like valleys (where roof slopes meet), vents, and chimneys. If you see any water stains, mold, rot, warping, or actual wetness, you should call a professional immediately. On the outside of your roof, potential problems could include curling, cracked, broken, or missing shingles, tiles, or other roofing material, as well as peeling flashing around chimneys or vents.

A good way to gauge the ongoing state of your roof is to take digital photos during your inspection as a way to document changes from year to year. These can also help you in the event that you need to contact Taves roofing LTD or another roofing repair company since you can email your pics in order to get estimates, or at least present them to show how the damage progressed. Of course, if you live in an area that experiences harsh weather conditions, you might want to conduct inspections more often than once a year, especially following a particularly bad storm. This will ensure that your roof stays in the best possible condition and that you can target and repair any problems before they affect the rest of your home.

Related posts:

  1. Commercial Roofing How-To: Be Prepared For Roof Repair
  2. How to Determine the Cause of a Leaking Roof
  3. Buyer Beware: 5 Common Home Inspection Red Flags
  4. 8 Things to Consider Before Replacing Your Old Roof
  5. 5 Tips for Preventing Mold Growth in Your Home This Winter
Both comments and pings are currently closed.

Comments are closed.